NeoSol unveils 550 W mono PERC solar modules

Share

From pv magazine India

India's NeoSol has unveiled its Black Pearls series of mono PERC modules, featuring a multi-busbar design.

The modules are built with 144 half-cut mono PERC cells, formed using gallium (Ga)-doped wafers, and 10 busbars. These are available in power outputs ranging from 535 W to 550 W, with power conversion efficiencies between 20.7% and 21.33% under standard testing conditions. The open-circuit voltage is 49.98 V to 50.62 V, and the short-circuit current 13.5 A to 13.86 A.

Popular content

“The USP of this range is high module efficiency, shade tolerance, less hot spots, and reduced power loss. The modules are cost effective and provide maximum output from a limited space,” Arpit Aggarwal, managing director of NeoSol, told pv magazine.

The panels measure 2,278 mm × 1,134 mm × 35 mm and weigh 29 kg. They feature 3.2 mm anti-reflective tempered glass, a composite film backsheet, and a silver anodized aluminum frame (black frames available on request). The maximum system voltage is 1,500 V DC. The panels have a Pmax temperature coefficient of -0.35% per degree Celsius, and their operating temperature ranges from -40 C to 85 C. The panels are certified to withstand wind-induced load of 2,400 Pascal and snow load of 5,400 Pascal.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.